![]() Phone: 877-789-8547 Address: 1031 Narregan St Medford, Oregon 97501 |
|||
|
|
|||
| Suzuki Samurai Rockmonster gear Series | |||
4.9:1 - 115% reduction Item RMG-491 Price $595.00 Complete rebuilt t-case $845.00 plus $250.00 core charge |
“ROCK MONSTER” Gears!![]() |
6.4:1 - 181% reduction Item RMG-641 Price $719.00 Complete rebuilt t-case $969.00 plus $250.00 core charge ![]() |
|
|
|
|||
| Sidekick/Tracker/Vitara 4.24:1 Rockmonster Transfer Case Gears | |||
Item #RMG-424 Retail Price $895.00 |
|||
|
Suzuki Samurai Crawler Gear Set |
|||
|
Trail Tough's economical 4.16:1 gear set. 84% low range reduction, 12% high
range reduction. A must when using larger tires.
Economy set - includes gears only Item
Ask about other gear Ratios available |
|||
| T-Case Seal Kit | |||
|
|
Includes all gaskets, seals, and a new shifter sheet.
Item #TCS-400 Price $ 24.95 |
||
| Transfer Case Bearing Kit | |||
|
|
Includes bearings, seals, and gaskets necessary for rebuilding a Samurai
transfer case.
Item #TCB-400 Price $89.00 |
||
|
Mighty Kong - Replacement Tcase Mounts |
|||
|
Announcing our "Mighty Kong" combination t-case mount / skid plate. This
extreme-duty unitized design will not flex or distort and actually adds
strength to your case. It provides protection where you need it - not where
you don't and weighs only 12 lbs. It is also designed to accommodate drum or
disc e-brake upgrades.
Item # MKT- 400 Price $ 189.00 |
|||
|
"Gorilla Grip" Transfer Case Mounts |
|||
If your're tired of broken transfer case mounts, here is the answer! The NEW "Gorilla Grip" unbreakable transfer case mounts are designed to work specifically with the Mighty Kong" and won't allow wallowed out holes in your frame like the poly transfer case mounts do! Item #SGG-400 Price $29.50 each - set of all three $79.95 *Mighty Kong Tcase Mount Not included |
|||
|
Rear Drive Disconnect |
|||
| This compact unit
simply replaces the rear drive shaft flange of the Samurai transfer case. It
is a great alternative for the Samurai owner who can take advantage of the
benefits of all of the various new transfer case gearing options and have
the ability to "burn-turn" or do front wheel digs......just like the guys
with the Atlas cases! Our rear drive disconnect works not only for the
serious wheeler's burn-turning needs, but also works excellent for
disconnecting the drive shaft for guys who just want to flat tow. Item #DIS-400 Price $399.00 For Toyotas Item #DIST-400 Price $429.00
|
|||
|
Extended Slip Yokes |
|||
|
|
Trail Tough's extended slip yokes Extended slip yokes available 1" or 2"
longer than stock. These can be used with the stock shaft portion of your
driveline and do not cause an increase in u-joint operating angle as do the
spacers.
1" slip yoke 2" slip yoke |
||
|
Driveline Spacers |
|||
|
1" aluminum driveline spacers. Fits both
early and late patterns. Specify early or late for the correct bolts. |
|||
|
Factory OEM U-Joints |
|||
|
They are not cheap but when you get tired
of breaking and replacing those short-lived aftermarket ones and you
have torn up a few spendy driveshafts, these u-joints will end your woes
and last for years! These are the only ones WE will use! |
|||
| CV Type Drivelines | |
|
Trail Tough's super shafts!
These drivelines are TOP quality and are heavy duty! They feature a
double cardan CV joint to minimize driveline vibration with a range of
motion up to 28 degrees. Custom lengths are available. Fits early and late
flange patterns. Specify flange size and flange to flange measurement when
ordering. Front Rear |
|
|
|
|
|
|
|
![]()